2366288125 - 6C3F(37KW;575;60;W)
Franklin’s 6-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 6-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
Sample image - may not be representative of product features
2366288125 - 6C3F(37KW;575;60;W)
Franklin’s 6-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 6-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
Item
Model:
Ratings
| HP | 50 hp |
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps – Full Load | 61.6 A |
| Amps – Service Factor | 61.6 A |
| Volts | 575 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Motor Connection | DOL |
| Thrust Bearing Rating | 6000 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 87.00 % |
| Protection [IP] | IP68 |
| Lead Wire Size | AWG #8 |
| Motor Insulation Classification | F |
| Poles | 2 |
| S.F. | 1.15 |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 6000 lb |
| Motor Adapter | Double flange |
| Rotation | Counter clockwise facing the shaft |
| SubTrol Heat Sensor | Yes |
Materials of Construction
| Motor Shaft End – Material | 17-4SS |
| Thrust Bearing | Kingsbury Type |
| Seal Material | Silicon Carbide / Silicon Carbide |
| Seal | Mechanical Seal |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Bottom End Bell Material | Cast Iron with E-Coat Paint |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | FES91 |
| Motor Top End Bell Material | Cast Iron with E-Coat Paint |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Ends Material | Carbon Steel |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | 300 Series SS |
| Winding Material | Copper |
Dimensions
| Motor Diameter – Physical Diameter | 5.44″ |
| Motor Length | 58.2 “ |
| Product Weight | 267 lb |
| Product Weight with Pack | 300 lb |
| Carton Length | 71.75 “ |
| Carton Width | 8.75 “ |
| Carton Height | 10.5 “ |
| Shaft End | Spline |
Other
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
Ready to working with us?
Please fill in the following form. You will be contacted as soon as possible.