2347288802G - 4C3F(7.5HP,460/380,6/5,SF)
Franklin Electric 4" encapsulated submersible motors, built in ISO 9001 certified facilities for outstanding performance in 4" or larger water wells. The 1-phase PSC motor has been electrically optimized to offer reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty.
Sample image - may not be representative of product features
2347288802G - 4C3F(7.5HP,460/380,6/5,SF)
Franklin Electric 4" encapsulated submersible motors, built in ISO 9001 certified facilities for outstanding performance in 4" or larger water wells. The 1-phase PSC motor has been electrically optimized to offer reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty.
Item
Model:
Ratings
| HP | 7.5 hp |
| Frequency | 50Hz/60Hz |
| Phases | Three-Phase |
| Amps – Full Load | 10.9 A |
| Amps – Service Factor | 12.4 A |
| Volts | 380 VAC / 400 VAC / 415 VAC / 460 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 1500 lb |
| Lead Length | 8.33 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Clamp Style |
| Motor Insulation Classification | B |
| Poles | 2 |
| S.F. | 1.15 |
| HP | 7.5 hp |
| Lead | Yes |
| Service Factor – 50Hz | 1 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 1500 lb |
| Rotation | Counter clockwise facing the shaft |
Materials of Construction
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | Water + Propylene Glycol |
| Motor Top End Bell Material | Stainless Steel |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | Stainless Steel |
| Winding Material | Copper |
Dimensions
| Motor Diameter – Physical Diameter | 3.75″ |
| Motor Length | 29.18 “ |
| Product Weight | 71 lb |
| Product Weight with Pack | 71 lb |
| Carton Length | 33.75 “ |
| Carton Width | 6.5 “ |
| Carton Height | 6.25 “ |
| Shaft End | Spline |
Other
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | These motors are built for dependable operation in 4” diameter or larger water wells. |
Ready to working with us?
Please fill in the following form. You will be contacted as soon as possible.