2345549003GS
Sample image - may not be representative of product features
2345549003GS
Item
2345549003GS
PRINT THIS PAGE
Ratings
| Frequency | 50 Hz |
| Phases | Three-Phase |
| Amps – Full Load | 5.2 A |
| Amps – Service Factor | 5.2 A |
| Volts | 220 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 650 lb |
| Lead Length | 4 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Efficiency [η] – Full Load (%) | 76.00 |
| Efficiency Service Factor Load [%] | 76.00 % |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Lead Jam Nut |
| Motor Insulation Classification | B |
| Poles | 2 |
| HP | 1.5 hp |
| Lead | Yes |
| Service Factor – 50Hz | 1 |
| Motor Cooling | Water |
| Minimum Cooling Flow | >0.00 ft/sec |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 650 lb |
| Rotation | Counter clockwise facing the shaft |
Materials of Construction
| Thrust Bearing | Kingsbury Type |
| Seal | Lip Seal Ring |
| Lead Insulation Material | XLPE |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Construction Design | Super Stainless |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | Water + Propylene Glycol |
| Motor Top End Bell Material | 304SS Cover painted cast iron |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | Stainless Steel |
| Winding Material | Copper |
Dimensions
| Motor Diameter – Physical Diameter | 3.75″ |
| Motor Length | 11.73 “ |
| Product Weight | 24 lb |
| Product Weight with Pack | 24 lb |
| Carton Length | 19 “ |
| Carton Width | 4.25 “ |
| Carton Height | 4.38 “ |
| Shaft End | Spline |
Other
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | These motors are built for dependable operation in 4” diameter or larger water wells. |
Ready to working with us?
Please fill in the following form. You will be contacted as soon as possible.