2243012316GS
Sample image - may not be representative of product features
2243012316GS
Item
2243012316GS
PRINT THIS PAGE
Ratings
| HP | 2 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps – Full Load | 10 A |
| Amps – Service Factor | 13.2 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 650 lb |
| Lead Length | 4 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Efficiency [η] – Full Load (%) | 69.00 |
| Efficiency Service Factor Load [%] | 74.00 % |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Lead Jam Nut |
| Motor Efficiency | 75.0 |
| Motor Insulation Classification | B |
| Poles | 2 |
| S.F. | 1.25 |
| Lead | No |
| Motor Cooling | Water |
| Minimum Cooling Flow | >0.00 ft/sec |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 650 lb |
| Rotation | Counter clockwise facing the shaft |
Materials of Construction
| Thrust Bearing | Kingsbury Type |
| Seal | Lip Seal Ring |
| Lead Insulation Material | Not Applicable |
| Diaphragm Material | Fluoroelastomers (FKM, and EPDM) |
| Motor Construction Design | Super Stainless |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | Water + Propylene Glycol |
| Motor Top End Bell Material | 304SS Cover painted cast iron |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | Stainless Steel |
| Winding Material | Copper |
Dimensions
| Motor Diameter – Physical Diameter | 3.75″ |
| Motor Length | 15.12 “ |
| Product Weight | 33 lb |
| Product Weight with Pack | 33 lb |
| Carton Length | 21.25 “ |
| Carton Width | 4.25 “ |
| Carton Height | 4.38 “ |
| Shaft End | Spline |
Other
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | These motors are built for dependable operation in 4” diameter or larger water wells. |
Ready to working with us?
Please fill in the following form. You will be contacted as soon as possible.