66S12-PPI-01-D - PPTP66S12L71-TD2.9
Sample image - may not be representative of product features
66S12-PPI-01-D - PPTP66S12L71-TD2.9
Item
66S12-PPI-01-D
Model:
PPTP66S12L71-TD2.9
PRINT THIS PAGE
Ratings
| Rated HP | 59 HP |
| Control Box Type | LOFA CP750E |
| BEP Head – 1,800 rpm | 86 ft / 26.21 m |
| Max. HP | 74 hp |
| Max. Flow Rate – 60 Hz | 2840 gpm / 170400 gph / 4089599.98 gpd / 645034 Lph / 10750.57 Lpm / 645.03 m³/h |
| BEP Flow Rate – 1,800 rpm | 1675 gpm / 100500 gph / 2411999.99 gpd / 380434 Lph / 6340.56 Lpm / 380.43 m³/h |
| Max. Head – 60 Hz | 182 ft / 55.47 m |
| Max. Solid Handling Size | 3 ” / 7.62 cm |
| Fuel Tank | 75 gal / 283.91 L |
| Fuel Consumption | 0.05 gpm / 3 gph / 73.68 gpd / 12 Lph / 0.19 Lpm / 0.01 m³/h |
| Best Efficiency Point – 60 Hz | 71 % |
| Maximum Operating Speed | 2200 rpm |
Liquid
| Max. Fluid Temperature | 200 °F / 93.33 °C |
Materials of Construction
| Volute Material | Ductile Iron |
| Impeller Type | Enclosed |
| Impeller Material | CA6NM Stainless Steel |
| Bearing Frame Lubrication Type | Oil |
| Seal Material | Silicon Carbide / Tungsten Carbide / FKM / SS |
| Seal Type | Mechanical Seal |
| Coupling Material | Vulcanized Rubber |
| O-ring Material | Viton |
| Pump Shaft Material | 17-4 PH Stainless Steel |
| Wear Ring Material | ASTM A48 Class 40 Gray Iron |
| Priming Type | Pioneer Prime |
| Engine Brand | Deutz |
| Engine Model | TD2.9L4 |
Dimensions
| Discharge Type | Flat Face Flange – ANSI 150 |
| Discharge | 6 “ |
| Impeller Dia. | 11 ” / 279 mm |
| Suction | 6 “ |
| Suction Type | Flat Faced Flange – ANSI 150 |
| Product Weight (Dry) | 3400 lb / 1542.21 kg |
| Product Weight (Wet) | 3932 lb / 1783.53 kg |
Other
| Warranty Standard Time | 24 Months |
| Spec Sheet | |
| Owner’s Manual | |
| Parts Breakdown |
Ready to working with us?
Please fill in the following form. You will be contacted as soon as possible.